Surface Mounted – LED Aluminum Profile Collection

Surface mounted LED aluminum profiles fix straight to the panel. No groove is cut, so a thin board keeps its strength and the channel can be replaced later.

Choose by mounting method

  • Surface mounted — Fixed to the face, with the profile left visible.
  • Recessed — A routed slot lets the diffuser finish flush.
  • Trimless — Set into the finish before plastering.

Match the strip to the bay

  • Strip widths — This series prints bays from 5 mm to 32 mm.
  • Stock lengths — 3000 mm and 4000 mm are the catalogue standards.
  • Clearance — Check the space behind the channel before fixing.
  • Diffuser — A wider bay gives a more even line across a worktop.

What each product page shows

  • Cross-section — Printed dimensions and diffuser height.
  • Installation — A three-step fixing sequence.
  • Accessories — End caps and fixings where the page prints them.

The 41 profiles below are grouped by size class. Start with the buying guide to compare all fourteen series.

Original catalogue application photograph - kitchen island run, model 196-M1010 (Surface Mounted)
Original catalogue application photograph – kitchen island run, model 196-M1010 (Surface Mounted)

What the drawings show

Cross-section
Cross-section

Printed profile dimensions for checking clearance and diffuser position.

Installation steps
Installation steps

The three-step fixing sequence as printed in the catalogue.

Accessories
Accessories

End caps and fixings on pages that print an accessories block.

At a glance

Selection factorWhat this page covers
Profiles on this page41
Size classesMedium size 10, Mini size 31
Printed strip widths10 mm, 12 mm, 15 mm, 18 mm, 19 mm, 20 mm, 24 mm, 30 mm, 32 mm, 5 mm, 8 mm
Stock lengths3000 mm, 4000 mm

Surface Mounted – Mini size (part 1/2)

Surface Mounted – Mini size (part 2/2)

Surface Mounted – Medium size

Related guides and collections

Update cookies preferences