Surface mounted LED aluminum profiles fix straight to the panel. No groove is cut, so a thin board keeps its strength and the channel can be replaced later.
Choose by mounting method
- Surface mounted — Fixed to the face, with the profile left visible.
- راحة — A routed slot lets the diffuser finish flush.
- Trimless — Set into the finish before plastering.
Match the strip to the bay
- Strip widths — This series prints bays from 5 mm to 32 mm.
- Stock lengths — 3000 mm and 4000 mm are the catalogue standards.
- Clearance — Check the space behind the channel before fixing.
- الناشر — A wider bay gives a more even line across a worktop.
What each product page shows
- Cross-section — Printed dimensions and diffuser height.
- تثبيت — A three-step fixing sequence.
- مُكَمِّلات — End caps and fixings where the page prints them.
The 41 profiles below are grouped by size class. Start with the buying guide to compare all fourteen series.
What the drawings show

Printed profile dimensions for checking clearance and diffuser position.

The three-step fixing sequence as printed in the catalogue.

End caps and fixings on pages that print an accessories block.
At a glance
| Selection factor | What this page covers |
|---|---|
| Profiles on this page | 41 |
| Size classes | Medium size 10, Mini size 31 |
| Printed strip widths | 10 mm, 12 mm, 15 mm, 18 mm, 19 mm, 20 mm, 24 mm, 30 mm, 32 mm, 5 mm, 8 mm |
| Stock lengths | 3000 mm, 4000 mm |









































