LT-NS1010 SIDE BEND 10*10mm 9.6 W/m

説明

The LT-NS1010 SIDE BEND 10*10mm 9.6 W/m is a silicone LED strip light from the Lightstec Neon Flex range, built for professional linear lighting projects. It delivers 9.6 W/m at DC24V with CRI 90, and is available in IP67 protection options. Wattage, CCT, CRI, PCB width, IP grade, reel length and private labelling can be customised for OEM/ODM orders.

Why choose this strip

• ■One-piece silicone extrusion — UV resistant, no yellowing in sunlight
• ■Solvent and salt-acid resistant, suitable for beaches and laboratories
• ■Water and dust proof with sealed end caps
• ■Small minimum bending diameter for tight curves and lettering
• ■Available in CCT, RGB and RGBW versions with matching drivers

Product Specification

Dimension & Cutting Unit

The drawings below are the original section-dimension and bending-direction diagrams from the Lightstec catalogue for this Neon Flex profile. Section size 10*10mm, minimum bending diameter >30 mm. Cut only at the marked cutting section (50 mm) and respect the horizontal bending direction.

Product Photometrics

Measured at 9.6 W/m, 25 °C. Luminaire lumens per metre and efficacy in lm/W by colour temperature, transcribed from the Lightstec catalogue.

Dust & Water Resistant

This Neon Flex profile is a one-piece silicone extrusion rated IP67. The LED strip is fully sealed inside the sleeve, so there is no exposed FPC, no silicone coating to peel off and no separate waterproof tube to fit on site. Section size 10*10mm, minimum bending diameter >30 mm。

Installation, Accessory & Profiles

Neon Flex uses its own mounting system rather than standard SMD strip connectors: aluminium or stainless-steel clips, moulded end caps, front lead cables and a constant-voltage driver with an optional LED controller. Keep each continuous run below 10 m and wire runs in parallel; cut only at the marked cutting section (50 mm).

• Mounting clips & profiles — 6x10mm aluminium clip, moulded clip and stainless-steel clip (100 m/carton); screw-fix the channel first, then press the sleeve in.
• End caps — end cap without hole plus a front lead cable with 2P connector; seal both ends with silicone for IP67 installations.
• Driver & controller — 35–350 W DC12/24V indoor driver or 35–200 W outdoor driver; add a CCT / RGB / RGBW controller between driver and strip.
• Bending — respect the >30 mm minimum bending diameter and the horizontal bending direction; never fold the sleeve against its bend axis.

Applications

Signage and lettering, facade contours, cove and indirect lighting, swimming pools and coastal areas, shops, hotels and outdoor architectural outlines.

OEM / ODM & Quotation

Lightstec has been manufacturing LED strip lights and LED linear lighting systems since 2008 in Guangdong, China. Wattage, CCT, CRI, PCB width, IP grade, reel length, packaging and private labelling can all be customized. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.

Specification and drawings: Lightstec LED Strip Light Catalog, page 077. Values are catalogue reference data; confirm against the production datasheet before ordering.

Related LED Strip Resources

Neon Flex runs are finished with matched mounting clips, end caps and waterproof joiners. Browse the Neon Flex Series range for matching models, and see the flex LED neon light guide for system planning.