Led strip light controller

1, DALI Led Controller Total Solutions:
Lightstec supply the total solution for a DALI system. The system is including a DALI software, a DALI master, a DALI bus power supply, DALI constant voltage drivers, DALI constant currents drivers, DALI panel, Sensor for DALI, DALI relay, DALI to 0-10V and DALI to phase cut(Triac/ELV) dimmer. Use this system, all the constant current or constant voltage lights can be controlled by DALI system, not only the lights use DALI drivers but also the lights use phase cut(Triac/ELV) drivers or 0-10V/1-10V drivers, and the non-dimmable products can be controlled ON/OFF by the DALI relay.

2, Tunable White Solutions:
2.1. DALI Tunable White Solution(DT8):
Lightstec supply the total solution for a DALI system. The system is including a DALI software, a DALI master, a DALI bus power supply, DALI constant voltage drivers, DALI constant currents drivers, DALI panel, Sensor for DALI, DALI relay, DALI to 0-10V and DALI to phase cut(Triac/ELV) dimmer. Use this system, all the constant current or constant voltage lights can be controlled by DALI system, not only the lights use DALI drivers but also the lights use phase cut(Triac/ELV) drivers or 0-10V/1-10V drivers, and the non-dimmable products can be controlled ON/OFF by the DALI relay.

2.2. 0-10V Tunable White Solution:
Lightstec supply 0-10V/1-10V tunable white solution with a 0-10V/1-10V panel and a constant voltage dimmer. Use this system, your tunable white led strips can be controlled.

3. DMX Total Solutions:
Lightstec supply the DMX control system from 2005. The system including DMX software, DMX master controller, DMX decoders, DMX drivers, DMX splitters, DMX relays, DMX to 0-10V dimmers, DMX to phase cut(Triac/ELV) dimmers. Use this system, all the constant current or constant voltage lights can be dimmed by DMX system, not only the lights use DMX drivers but also the lights use phase cut(Triac/ELV) drivers or 0-10V/1-10V drivers, and the non-dimmable products can be controlled ON/OFF by our DMX relay. The DMX decoders can be one channel for dimming, two channel for tunable white, three channel for RGB, 4 channel for RGBW, 5 channel for RGBWW，12 channel, 24 channel, and 32 channel.