Office & Commercial Lighting – LED Aluminum Profiles

Offices and commercial interiors need a light line that stays even, does not glare at eye level, and can be serviced without opening the ceiling.

Three families, three layouts

  • Indirect Lighting — A concealed cove washes the ceiling or wall.
  • Ripa — Surface fixing where a groove is not practical.
  • Tri-proof — Utility areas where the fitting stays exposed.

Check the layout first

  • Cove depth — A shallow recess crops the wash.
  • Panel surface — Confirm fixing and whether the diffuser can show.
  • Largura da tira — Match the printed bay to the tape you specify.
  • Sight lines — Keep the diffuser out of direct eye level.

Then specify the run

  • Stock length — The catalogue lists 3000 mm sections.
  • Drawings — Each product page carries the cross-section and fixing steps.
  • Acessórios — End caps and fixings where printed.

The 40 profiles below are grouped by series so you can compare like with like.

Original catalogue application photograph - office corridor with a continuous ceiling line, model 376-C10360 (Indirect Lighting)
Original catalogue application photograph – office corridor with a continuous ceiling line, model 376-C10360 (Indirect Lighting)

What the drawings show

Cross-section
Cross-section

Printed profile dimensions for checking clearance and diffuser position.

Installation steps
Installation steps

The three-step fixing sequence as printed in the catalogue.

Acessórios
Acessórios

End caps and fixings on pages that print an accessories block.

At a glance

Selection factorWhat this page covers
Profiles on this page40
Size classesLarge size 11, Medium size 22, Mini size 7
Printed strip widths10 mm, 12 mm, 14 mm, 18 mm, 20 mm, 5 mm, 8 mm
Stock lengths1200 mm or 3600 mm, 1200 mm or 4800 mm, 3000 mm

Series: Clapboard

Series: Indirect Lighting (part 1/2)

Series: Indirect Lighting (part 2/2)

Series: Tri-proof Light

Related guides and collections

Atualizar preferências de cookies