Offices and commercial interiors need a light line that stays even, does not glare at eye level, and can be serviced without opening the ceiling.
Three families, three layouts
- Indirect Lighting — A concealed cove washes the ceiling or wall.
- Clapboard — Surface fixing where a groove is not practical.
- Tri-proof — Utility areas where the fitting stays exposed.
Check the layout first
- Cove depth — A shallow recess crops the wash.
- Panel surface — Confirm fixing and whether the diffuser can show.
- Širina traku — Match the printed bay to the tape you specify.
- Sight lines — Keep the diffuser out of direct eye level.
Then specify the run
- Stock length — The catalogue lists 3000 mm sections.
- Drawings — Each product page carries the cross-section and fixing steps.
- Dodatki — End caps and fixings where printed.
The 40 profiles below are grouped by series so you can compare like with like.
What the drawings show

Printed profile dimensions for checking clearance and diffuser position.

The three-step fixing sequence as printed in the catalogue.

End caps and fixings on pages that print an accessories block.
At a glance
| Selection factor | What this page covers |
|---|---|
| Profiles on this page | 40 |
| Size classes | Large size 11, Medium size 22, Mini size 7 |
| Printed strip widths | 10 mm, 12 mm, 14 mm, 18 mm, 20 mm, 5 mm, 8 mm |
| Stock lengths | 1200 mm or 3600 mm, 1200 mm or 4800 mm, 3000 mm |



































