Surface Mounted vs Recessed LED Aluminum Profiles

Surface mounted and recessed profiles solve different problems. One fixes to the panel face; the other needs a routed groove.

Surface mounted

  • No routing — Nothing is cut from the board.
  • Visible channel — The profile reads as a slim line.
  • Late decision — Can be specified after joinery is fitted.
  • Board thickness — No minimum set by the channel.

Tersembunyi

  • Routed slot — The diffuser finishes level with the surface.
  • Hidden source — The light reads as part of the building.
  • Early planning — Must be coordinated before panels are cut.
  • Flush finish — The diffuser sits level with the panel.

What decides it

  • Panel material — Thin boards favour surface fixing.
  • Clearance — Check the depth behind the channel.
  • Servicing — A surface channel is easier to replace.
  • Labour — Surface fixing needs no routing.
  • Settings — Kitchens and retail favour surface; coves favour recessed.

Use the decision table below, then open the full collection for every printed cross-section.

Original catalogue application photograph - restaurant interior, model 348-C7230 (Trimless Recessed)
Original catalogue application photograph – restaurant interior, model 348-C7230 (Trimless Recessed)

What the drawings show

Cross-section
Cross-section

Printed profile dimensions for checking clearance and diffuser position.

Installation steps
Installation steps

The three-step fixing sequence as printed in the catalogue.

Aksesoris
Aksesoris

End caps and fixings on pages that print an accessories block.

At a glance

Selection factorWhat this page covers
Profiles on this page16
Size classesMedium size 13, Mini size 3
Printed strip widths10 mm, 14 mm, 15 mm, 18 mm, 19 mm, 20 mm, 24 mm, 30 mm, 32 mm
Stock lengths3000 mm, 4000 mm

Surface mounted examples (no groove required)

Recessed examples (groove required)

Related guides and collections

Perbarui preferensi cookie