Sensor Sakelar Peredup Sentuh LP-9026WT untuk Strip LED
Recessed capacitive touch dimmer — 0–100% control of 12/24 V LED strips through a panel up to 11 mm thick.
- ■Capacitive touch on/off and 0–100% dimming in one compact head
- ■Senses through wood, glass or acrylic panels up to 11 mm thick
- ■12/24 V input with 24 W maximum load
- ■φ17 mm drill hole with a 19 mm bezel for clean recessed mounting
- ■1.5 m input and 0.5 m output leads, DC+ / DC- clearly marked
Keterangan
The LP-9026WT is a recessed capacitive touch dimmer for single-colour LED strip lighting. Touching the panel switches the light, and the same head provides full 0–100% dimming without a separate wall controller. It fits a φ17 mm hole in cabinet walls, shelves and furniture up to 11 mm thick.
Why choose this sensor
- ■Touch control through non-metallic panels — no exposed moving parts
- ■Smooth 0–100% dimming with no external PWM controller
- ■Works on both 12 V and 24 V systems, up to 24 W
- ■φ17 mm drill hole, 11 mm body thickness, 19 mm bezel
- ■Pre-wired 1.5 m input / 0.5 m output with marked DC+ / DC-
- ■CE / RoHS / FC / IC markings as printed in the catalogue
Spesifikasi Produk
| Nomor Model. | LP-9026WT |
| Tegangan Masukan | 12/24 V DC |
| Power (max) | 24 W |
| Dimmable | 0–100% |
| Sensor Drill hold | φ17 mm |
| Thickness | 11 mm |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Parameter | Actual value / behaviour |
|---|---|
| Trigger method | Capacitive touch through a non-metallic panel (11 mm thickness) |
| Dimming behaviour | 0–100% smooth dimming by touch |
| Maximum load | 24 W at 12/24 V DC |
| Mounting | Recessed, φ17 mm drill hole, 19 mm bezel |
| Cable | 1.5 m input / 0.5 m output, DC+ / DC- marked |
| Compliance | CE / RoHS / FC / IC |
Dimension & Wiring
The complete original catalogue drawing for this model: sensor body, controller box, input / output cable lengths, connector orientation and drill-hole dimensions. Unit: mm.
Instalasi
Fit the sensor head through a φ17 mm hole, connect the marked INPUT side to the DC driver and the OUTPUT side to the LED strip, then feed AC220 V to the driver. Keep DC+ / DC- polarity consistent on both runs.
Sumber Daya Strip LED Terkait
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range untuk model yang cocok, dan lihat LED sensor and switch guide untuk perencanaan sistem.
OEM / ODM & Kutipan
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 068. Values are catalogue reference data; confirm against the production datasheet before ordering.
Informasi tambahan
| Nomor Model. | LP-9026WT |
|---|---|
| Sensor Type | Touch dimmer |
| Tegangan Masukan | 12/24 V DC |
| Max Load | 24 W |
| Dimming | 0–100% |
| Drill Hole | φ17 mm |
| Thickness | 11 mm |
| Mounting | Tersembunyi |
| Cable | 1.5 m in / 0.5 m out |
| Certification | CE / RoHS / FC / IC |
Ulasan
Belum ada ulasan.