A real spec-for-spec case: one customer walked in with a Philips Fortimo spec sheet and walked out with a better, factory-direct LED strip from Lightstec.
More and more lighting buyers are walking into Chinese factories with a Philips, Osram or Bridgelux specification sheet and asking one question: “Can you make this for us?”
The answer is yes — and it is not a compromise. China’s LED industry now spans the entire supply chain: chips, PCB, silicone extrusion, drivers, testing and mass production. As global brands either stop manufacturing or hand their R&D and production to Chinese factories (keeping only sales), the factory-direct OEM path has become the rational choice for spec-driven buyers.
This article walks through a real replacement project — a customer’s Philips Fortimo LEDFlex 1000 lm/m G1 spec, replaced by our LT-2835WW160R-W24 — and explains exactly what you gain.
- Why buyers are moving from Philips, Osram & Bridgelux to Chinese OEMs
- Spec-for-spec: Lightstec LT-2835WW160R vs Philips Fortimo
- What the comparison really means for your project
- Real projects built with Lightstec strips
- How a spec-for-spec replacement project works
- Why Lightstec as your OEM / ODM partner
- Replacement & sourcing FAQ
- Conclusion: send us your spec sheet
Why Buyers Are Moving from Philips, Osram & Bridgelux to Chinese OEMs
The shift is not about “cheap copies.” It is about an industry that has genuinely caught up:
Chips, FPC, 3M tape, silicone tube, drivers and automated production are all available locally. A Chinese factory can engineer to a western spec with the same components the global brands use.
Many international brands have outsourced manufacturing or OEM/ODM to China and now focus on the sales side. The “factory” behind the brand is often already Chinese.
Buyers save on brand premium and middlemen, typically 30–50%, while getting comparable or better specs — faster delivery and full customization included.
That is exactly what happened in this project. The customer arrived with a Philips Fortimo LEDFlex 1000 lm/m G1 datasheet and asked us to build a drop-in replacement. Here is the honest, spec-by-spec comparison.
Spec-for-Spec: Lightstec LT-2835WW160R vs Philips Fortimo
Both strips are DC 24 V constant-voltage LED flex designed for built-in cove, extrusion and decorative applications. The table below compares the two at their native specification levels.
| Spesifikasi | Lightstec LT-2835WW160R-W24 | Philips Fortimo 1000 lm/m G1 |
|---|---|---|
| CRI | >90 (90+/95+/full-spectrum options) | 80 |
| LED density | 160 LEDs/m | 70 LEDs/m |
| CCT options | 2700 / 3000 / 4000 / 5000 / 6000 K | 2700 / 3000 / 4000 / 6500 K |
| Color consistency | 3-Step MacAdam ellipse, single binning | 3 SDCM |
| Cut unit | 50 mm | 100 mm |
| Max luminous flux @4000K | 1740 lm/m | 1000 lm/m |
| Max efficacy | 145 lm/W @4000K (CRI >90) | 152 lm/W @4000K (CRI 80) |
| IP rating | IP20 / IP55 / IP65 / IP67 options | No IP rating (built-in only) |
| Tegangan masukan | DC 24 V | DC 24 V |
| Mounting | 3M adhesive + high-quality FPC | 3M self-adhesive tape |
Honest note on the numbers: the Fortimo is the 1000 lm/m tier; the Lightstec 160-LED strip is a higher-flux tier, which is why its lumen output is higher. Both figures are taken directly from each manufacturer’s datasheet. When color rendering is equalized, the Lightstec strip at CRI >90 holding 145 lm/W is a strong result — high CRI normally costs luminous efficacy.
What the Comparison Really Means for Your Project
Skin tones, fabrics and retail merchandise look more natural. For hospitality, showrooms and residential projects, CRI 90+ is now the expected standard, not a premium.
The Fortimo has no IP rating. Lightstec offers IP20 to IP67 via silicone tube extrusion, so the same spec can go outdoors, under fascia, or in wet areas.
More than double the LED density of the Fortimo gives smoother, more uniform light — important for cove lighting and close-range extrusion profiles.
Cut every 50 mm instead of 100 mm lets you trim exactly to length in tight architectural details, reducing waste on site.
Specs matter, but a spec sheet is only half the story. The real proof is in finished projects.
Real Projects Built with Lightstec Strips
These are finished installations using Lightstec LED strips — the kind of work that gives buyers confidence before they place an order:
From villa gardens and sunken courtyards to waterside pavilions and wooden pergolas, the same strips that replace international-brand specs are already performing in the field.
How a Spec-for-Spec Replacement Project Works
Replacing an international-brand strip is straightforward when your factory can read and match a datasheet. The process we use for every spec-driven customer:
Share the original datasheet (any brand) or simply your requirements: CCT, CRI, flux, voltage, IP, cutting length.
Our engineers map every electrical and optical parameter to a manufacturable Lightstec spec — often improving CRI and adding IP options.
We build a sample to your exact spec so you can measure flux, color and consistency on your bench before any order.
Binning, CCT check, lumen test and IP sealing are verified before shipment — with photos and reports shared with you.
Why Lightstec as Your OEM / ODM Partner
SMD2835 / SMD5050 / COB strips, flexible & rigid, from 12 V to 24 V, with full CCT and CRI options — designed and produced in our own plant.
CE, RoHS and quality checks on every batch — color temperature, lumen output and IP sealing verified before shipment.
Custom length, color temperature, CRI, IP class, even logo printing on the PCB. Tell us what you need and we engineer it.
Replacement & Sourcing FAQ
Can you make a direct replacement for a Philips / Osram / Bridgelux strip?
Yes. Send us the datasheet and we map voltage, CCT, CRI, flux and cutting to a matching Lightstec spec — with options to improve CRI and add IP waterproofing.
Is the quality actually comparable to international brands?
Yes. We use the same-grade chips and components the global brands use, control color consistency to 3-Step MacAdam, and test every batch — then we let the spec sheet and the sample prove it.
What is your MOQ?
MOQ is flexible and depends on the model and customization level. For standard strips we can often accommodate smaller trial orders; custom specs start at a modest project quantity.
Can you print my brand on the PCB?
Yes — OEM logo and label printing is a standard option, so you can sell under your own brand with factory-direct pricing.
What about warranty and lead time?
Standard warranty applies to production batches, and typical lead time for a custom production run is a few weeks after sample approval. We share timelines before you order.
Conclusion: Send Us Your Spec Sheet
The days of choosing between “international brand” and “budget” are over. With China’s full LED supply chain, factory-direct strips from Lightstec now match — and in several ways exceed — the performance of Philips, Osram and Bridgelux, at a fraction of the price and with full customization.
If you have a Philips, Osram or any brand’s LED strip spec, send it to us. We will engineer a matching replacement, send you a sample to measure, and only then talk about production.
Produk Strip LED yang Direkomendasikan
Klik produk apa pun untuk melihat spesifikasi dan meminta penawaran:
Untuk menghemat waktu Anda, kami telah menyiapkan katalog PDF berisi semua produk lampu LED terbaru kami. Tinggalkan email Anda dan dapatkan segera.
Need a spec-for-spec LED strip replacement? Send your datasheet to us and get a free engineering match, sample and factory-direct quote.
Pelajari Lebih Lanjut Kelas Dipimpin Profesional Yang Lebih Sedikit Orang Memberi Tahu Anda Sebelum Anda Membuat Kesalahan.
