Light built into a shelf board reads as a clean line, with no channel hanging under the edge in view. All 21 profiles here come from the Laminate & Stair Linear Light series for furniture and board work at home.
A line inside the shelf
- Laminate groove — The channel sits in a routed slot in the shelf.
- Flush face — A diffuser finishes level with the board surface.
- Edge light — The strip washes the shelf edge and the item behind it.
One strip or two
- Single widths — 5 mm, 8 mm, 10 mm and 12 mm bays are listed.
- Twin widths — Some models take 12 mm/8 mm or 8 mm/5 mm strips.
- 20 mm bay — A few profiles take a broader strip.
Length and size class
- Stock lengths — 3000 mm and 4000 mm match standard sheet sizes.
- Large share — 10 of the 21 profiles are Large, 9 Medium, 2 Mini.
- One series — Every model sits in Laminate & Stair Linear Light.
These 21 profiles bring light into the shelf itself. Read the buying guide, then browse the Laminate & Stair Linear Light collection.
What the drawings show

Printed profile dimensions for checking clearance and diffuser position.

The three-step fixing sequence as printed in the catalogue.

End caps and fixings on pages that print an accessories block.
At a glance
| Selection factor | What this page covers |
|---|---|
| Profiles on this page | 21 |
| Size classes | Large size 10, Medium size 9, Mini size 2 |
| Printed strip widths | 10 mm, 12 mm, 12 mm/10 mm, 12 mm/8 mm, 20 mm, 5 mm, 8 mm, 8 mm/5 mm |
| Stock lengths | 3000 mm, 4000 mm |




























