LP-5026M Door Open Close Sensor — Surface Mounted
Surface-mounted door sensor — no drilling, pastes onto the cabinet frame and detects door movement within 5 cm.
- ■Surface mounted / paste fixing — no drill hole needed
- ■Door open / close detection within < 5 cm
- ■5–24 V input, 36 W maximum load at 12 V
- ■Compact 28 mm × 14 mm IR sensor switch
- ■1 m input / 13 cm output cable with marked INPUT / OUTPUT
Descrizione
The LP-5026M is a surface-mounted door open/close sensor for retrofit cabinet lighting. Because it is pasted onto the frame rather than embedded, it can be added to finished furniture without drilling, while still switching the LED strip automatically when the door moves.
Why choose this sensor
- ■Retrofit friendly — paste mounting, no hole required
- ■< 5 cm door sensing distance
- ■Wide 5–24 V input, 36 W load at 12 V
- ■Small 28 mm × 14 mm IR sensor switch housing
- ■Clearly marked INPUT / OUTPUT cable directions
- ■CE / RoHS / FC / IC markings as printed in the catalogue
Specifiche del prodotto
| Model No. | LP-5026M |
| Tensione in ingresso | 5–24 V DC |
| Power (max) | 36 W (12 V) |
| Sensing Distance | < 5 cm |
| Fixture way | Mounted / paste (surface) |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Parametro | Actual value / behaviour |
|---|---|
| Trigger method | Door open / close detection, surface mounted |
| Sensing distance | < 5 cm |
| Maximum load | 36 W at 12 V (5–24 V DC input) |
| Montaggio | Surface mounted / adhesive paste, no drilling |
| Housing | 28 mm × 14 mm IR sensor switch |
| Cable | 1 m input, 13 cm output, 8.3 mm / 5.2 mm lead diameters |
Dimension & Wiring
The complete original catalogue drawing for this model: sensor body, controller box, input / output cable lengths, connector orientation and drill-hole dimensions. Unit: mm.
Installazione
Paste the sensor onto the cabinet frame facing the door, connect INPUT to the DC driver and OUTPUT to the LED strip, then feed AC220 V to the driver. No drilling or cut-out is required.
Risorse correlate alle strisce LED
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range per i modelli corrispondenti e vedere il LED sensor and switch guide per la pianificazione del sistema.
OEM/ODM e preventivo
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 070. Values are catalogue reference data; confirm against the production datasheet before ordering.
Ulteriori informazioni
| Model No. | LP-5026M |
|---|---|
| Sensor Type | Door open/close |
| Tensione in ingresso | 5–24 V DC |
| Max Load | 36 W (12 V) |
| Sensing Distance | < 5 cm |
| Housing | 28 × 14 mm |
| Montaggio | Surface / paste |
| Drilling | Not required |
| Cable | 1 m in / 13 cm out |
| Certification | CE / RoHS / FC / IC |
Recensioni
Non ci sono ancora recensioni