LT-Touch Touch Sensor — Inside Profile
Hidden capacitive touch control behind a PC diffuser — touch the profile itself to switch the LED strip on or off.
- ■Capacitive touch through a PC diffuser thinner than 3 mm
- ■No visible switch — sensor sits inside the aluminium profile
- ■5–24 V input with 24 W maximum load
- ■Mounted / paste fixing, no external control box
- ■Works with the six-output-port power supply shown in the catalogue
Description
The LT-Touch is an inside-profile capacitive touch sensor. Mounted behind a PC diffuser thinner than 3 mm, it turns the whole aluminium profile into a touch surface, so the light can be switched without any visible control.
Why choose this sensor
- ■Touch the profile surface — no visible switch
- ■Senses through PC < 3 mm diffusers
- ■5–24 V input, 24 W maximum load
- ■Mounted / paste fixing inside the profile
- ■Low-profile board with spring touch pad
- ■CE / RoHS / FC / IC markings as printed in the catalogue
Product Specification
| Model No. | LT-Touch |
| Input Voltage | 5–24 V DC |
| Power (max) | 24 W |
| Sensing Distance | PC < 3 mm |
| Fixture way | Mounted / paste (inside) |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Paramètre | Actual value / behaviour |
|---|---|
| Trigger method | Capacitive touch through a PC diffuser |
| Panel / sensing distance | PC < 3 mm |
| Switching behaviour | Touch the profile surface to switch on / off |
| Maximum load | 24 W at 5–24 V DC |
| Mounting | Mounted / pasted inside an aluminium profile |
| Compliance | CE / RoHS / FC / IC |
Installation
Paste the board inside the aluminium profile directly behind the PC diffuser, connect the six-output-port power supply to AC220 V and run the 1.5 m output cable to the strip — the switch sits in the middle of the run.
Application
Profile-integrated cabinet and display lighting where the touch area is hidden behind the diffuser; the catalogue clip/profile sketch shows the mounting position.
Related LED Strip Resources
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range for matching models, and see the LED sensor and switch guide for system planning.
OEM / ODM & Quotation
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 071. Values are catalogue reference data; confirm against the production datasheet before ordering.
Informations complémentaires
| Model No. | LT-Touch |
|---|---|
| Sensor Type | Capacitive touch |
| Input Voltage | 5–24 V DC |
| Max Load | 24 W |
| Panel Thickness | PC < 3 mm |
| Mounting | Inside profile / paste |
| Contrôle | On/off by touch |
| Visibilité | Hidden behind diffuser |
| Cable | 1.5 m output |
| Certification | CE / RoHS / FC / IC |
Avis
Il n’y a pas encore d’avis.