LP-5027M2 Door Open Close Sensor — Double Door
Double-door version with two sensor heads — either door opening switches the same 5–24 V LED strip on.
- ■Two sensor heads, one shared in-line controller
- ■Either door opening triggers the same light
- ■< 8 cm sensing distance per head
- ■5–24 V input, 36 W maximum load at 12 V
- ■φ10 mm embedded heads, 30 mm × 7 mm controller
Description
The LP-5027M2 is the double-door version of the embedded door sensor. Two φ10 mm sensor heads feed one in-line controller, so opening either door switches the cabinet light on. It suits wardrobes and sideboards with two leaves.
Why choose this sensor
- ■Two sensor heads supplied for double-door furniture
- ■Either door controls the same LED strip
- ■< 8 cm sensing distance per head
- ■Wide 5–24 V input, 36 W load at 12 V
- ■φ10 mm drill holes, flush embedded mounting
- ■Compact 30 mm × 7 mm controller with 1 m / 13 cm cables
Product Specification
| Model No. | LP-5027M2 |
| Input Voltage | 5–24 V DC |
| Power (max) | 36 W (12 V) |
| Sensing Distance | < 8 cm |
| Sensor Drill hold | φ10 mm |
| Door configuration | Double door (sensor × 2) |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Paramètre | Actual value / behaviour |
|---|---|
| Trigger method | Door open / close detection with two sensor heads |
| Sensing distance | < 8 cm per head |
| Switching behaviour | Either door opening switches the same light on |
| Maximum load | 36 W at 12 V (5–24 V DC input) |
| Sensors supplied | 2 × φ10 mm heads, one shared controller |
| Controller / cable | 30 mm × 7 mm controller, 1 m input, 13 cm output |
Dimension & Wiring
The complete original catalogue drawing for this model: sensor body, controller box, input / output cable lengths, connector orientation and drill-hole dimensions. Unit: mm.
Installation
Fit one φ10 mm sensor into each door frame, plug both heads into the shared controller, wire AC220 V to the driver and connect the LED strip to OUTPUT.
Related LED Strip Resources
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range for matching models, and see the LED sensor and switch guide for system planning.
OEM / ODM & Quotation
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 069. Values are catalogue reference data; confirm against the production datasheet before ordering.
Informations complémentaires
| Model No. | LP-5027M2 |
|---|---|
| Sensor Type | Door open/close |
| Input Voltage | 5–24 V DC |
| Max Load | 36 W (12 V) |
| Sensing Distance | < 8 cm |
| Drill Hole | φ10 mm × 2 |
| Door Configuration | Double door |
| Sensors | 2 |
| Mounting | Embedded |
| Certification | CE / RoHS / FC / IC |
Avis
Il n’y a pas encore d’avis.