Flexible LED aluminum profiles bend to follow curves and shapes that a rigid straight bar simply cannot reach without a custom join. This hub holds just two Mini models, so the choice is narrow and every listed dimension matters here.
How the bend works
- Flexible series — Both models come from this one series.
- Size class — Each profile uses the Mini cross-section.
- Strip bays — The channels fit 8 mm and 12 mm strips.
Planning the curve
- Bend radius — Respect the printed minimum radius on each model.
- Strip choice — Pick a strip that tolerates bending along the curve.
- Support — Fix at close intervals so the curve holds its shape.
Ordering limits
- Stock length — Both bars come in 3000 mm only.
- Model codes — XL-551-M1505 and XL-552-M1805 are the two options.
- Scope — With only two models, compare every dimension carefully.
- Series scope — Only the Flexible series appears in this hub.
The two models below are the full set; use the buying guide to check the other size classes.
What the drawings show

Printed profile dimensions for checking clearance and diffuser position.

The three-step fixing sequence as printed in the catalogue.

End caps and fixings on pages that print an accessories block.
At a glance
| Selection factor | What this page covers |
|---|---|
| Profiles on this page | 2 |
| Size classes | Mini size 2 |
| Printed strip widths | 12 mm, 8 mm |
| Stock lengths | 3000 millimètres |


