På denne side
What Is ValoLight?
ValoLight is Finland’s dedicated lighting industry event, held at Messukeskus (Helsinki Expo and Convention Centre) in Helsinki. For years it has run alongside Habitare, the largest furniture and interior design fair in the Nordics, making it a single destination for lighting manufacturers, importers, designers, architects and project specifiers from Finland and the neighbouring Nordic and Baltic markets.
The show traditionally covers architectural lighting, home and interior lighting, outdoor and facade lighting, emergency lighting, lighting control and design consulting. It is a B2B handelsbegivenhed — consumers and visitors under 18 are not admitted, and no retail sales take place on site.
Nøglefakta
- Mødested: Messukeskus, Helsinki, Finland
- Type: B2B lysmesse
- Co-located with: Habitare (interior design fair)
- Audience: Importers, buyers, architects, designers
Tip
Show dates and floor plans change every year. Always confirm the exact dates, opening hours and free-entry requirements on the official Messukeskus website før bestilling af fly og hoteller.
Historically the exhibition has drawn around 16,000 professional visitors and 400 exhibitors, with architects making up the largest professional group — a sign that the Nordic lighting market is driven by specification and design, not just retail volume.
Who Should Attend ValoLight
ValoLight is most useful if you fall into one of these buyer profiles:
Lighting Importers & Distributors
Looking for new OEM/ODM brands, private label programs and factory-direct pricing for the Nordic and Baltic retail and project channel.
Architects & Lighting Designers
Specifying products for offices, retail, hospitality and residential projects, and comparing optical performance, CRI and control protocols.
Electrical Wholesalers
Sourcing SKUs with CE/RoHS compliance, reliable lead times and standardised warranty terms for the Finnish installation trade.
Contractors & Project Buyers
Comparing complete systems — strip lights, profiles, drivers and controls — for large tender projects across Finland, Sweden and Norway.
What to Expect at the Show
As a buyer, ValoLight is where the Nordic lighting ecosystem meets. Expect to see:
- Architectural and commercial lighting — linear systems, downlights, track and wall-wash solutions for offices and retail.
- Decorative and residential lighting — designer pendants, table lamps and integrated strip solutions for Nordic homes.
- Outdoor and facade lighting — IP65/IP67 rated fixtures for Nordic winters, snow and salt spray.
- Lighting control and sensors — DALI, Bluetooth mesh, motion and daylight harvesting.
- New product launches — most international brands use ValoLight/Habitare as their Nordic launch platform.
The visitor mix is roughly one-third architects, with the rest split between importers, manufacturers, real-estate developers and students — which means suppliers on the floor are typically briefed to talk to specifiers, not just shoppers.
Sådan forbereder du dig som køber
Walking the show cold is a waste of three days. Before you fly to Helsinki, get these four things done:
1. Definer din projektliste
List the projects you are quoting — office fit-outs, hotel refurbishments, retail chains — and the technical specs each one needs (voltage, CRI, IP rating, beam angle, control protocol).
2. Forudbestil møder
The show floor is loud and booths are busy. Email the suppliers you want to see weeks in advance and book a 30-minute slot. Bring samples, drawings and your target quantities.
3. Sammenlign overensstemmelsesdokumenter
For the EU market, ask every booth for CE declaration, RoHS, and (where relevant) ENEC, IEC 62471 photobiological safety and LM-79 / IES photometric reports.
4. Budget for factory-direct follow-up
The brands on the show floor mark up 30–60%. The same products are usually made by Chinese OEM factories. Take photos, part numbers and catalogues — then go straight to the source after the show.
Why Source LED Lighting from China (and Why Lightstec Makes Sense for the Nordics)
Most of the lighting brands you will meet at ValoLight are designed in Europe but manufactured in China. Working directly with the factory cuts out the middleman and gives you shorter lead times, customisation and private-label flexibility.
Lightstec er en Kina-baseret producent af LED strip lys, LED aluminiumsprofiler, LED lineære lys, LED neon flex and matching drivers and sensors, with over 13 years of experience shipping to Europe, including the Nordic markets.
Built for the Nordic climate
IP65 / IP67 / IP68 rated strips and sealed profiles for outdoor, stair, sauna and winter installations. Cold-tested PCB materials that hold up below –20°C.
EU-klar overholdelse
CE / RoHS certified. IES photometric files, LM-79 reports and IEC 62471 blue-light safety reports available on request for your tenders.
Komplet system, én leverandør
Strip + profil + diffuser + driver + stik + sensor i én karton. Ikke mere at jagte tre fabrikker for at få ét lineært belysningssystem til at fungere.
OEM / ODM venlig
Brugerdefineret PCB-længde, CCT, CRI (op til Ra98), mærkeudskrivning og tilpasset emballage. Små MOQ'er til prøveordrer, fabriksdirekte priser for volumen.
Recommended LED Products for the Nordic Market
If you are attending ValoLight to build your product range, these are the systems Nordic specifiers ask for most. Click any product to view specs and request a quote:
Planning to source LED lighting after ValoLight?
Send os din projektliste, målmængder og nødvendige certificeringer. Vi svarer inden for 24 timer med fabriksdirekte priser.
Ofte stillede spørgsmål
When and where is ValoLight held?
ValoLight takes place at Messukeskus, the Helsinki Expo and Convention Centre, typically in autumn alongside Habitare. Exact dates change each year — check the official Messukeskus website for the current edition before you plan your trip.
Is ValoLight open to the public?
No. ValoLight is a professional B2B trade show open only to lighting industry visitors. Consumers and visitors under 18 are not admitted, and there is no retail sales activity on the floor.
What should I bring to the show as a buyer?
Your business card, project drawings or product lists, target quantities, and a folder for catalogues. Pre-book meetings with key brands before the show — walking the floor without appointments usually means you only get ten-minute conversations at the booth.
Can I buy samples and ship them back to Finland from the show?
Some booths will sell small samples, but most international brands only quote project orders. For real pricing and samples, the better path is to contact the factory directly after the show. Lightstec ships free samples to EU buyers for qualified projects — just tage kontakt.
Do Chinese LED suppliers meet EU compliance requirements?
Reputable factories do. Always ask for CE Declaration of Conformity, RoHS test reports, and (for projects) IES photometric files and IEC 62471 photobiological safety reports. Lightstec ships to Europe with full documentation for every order.