2835SMD 60LEDs LED Strip Light 8mm 12W/m
A seamless, colour-consistent light line for cove, shelf and architectural projects — single-bin 2835 LEDs with 3-Step MacAdam control.
- ■0.5–24 W/m customizable wattage
- ■High quality FPC & genuine 3M adhesive
- ■CRI 80+ / 90+ / 95+ / full spectrum optional
- ■3-Step MacAdam ellipse, single binning
- ■Superior colour consistency & dimming performance
Description
The 2835SMD 60LEDs LED Strip Light is an 8 mm flexible LED tape built for cove lighting, retail shelving, signage, hotels and architectural linear lighting. Sixty high-efficiency 2835 LEDs per metre deliver a smooth, uniform light line at 12 W/m with CRI >90 and single-bin colour consistency. Available in 2700K, 3000K, 4000K, 5000K and 6000K, with IP20 / IP55 / IP65 / IP67 protection options.
Why choose this strip
- ■0.5–24 W customizable wattage for different project requirements
- ■High quality FPC with genuine 3M adhesive backing
- ■CRI 80+ / 90+ / 95+ / full spectrum optional
- ■3-Step MacAdam ellipse, single binning — superior colour consistency
- ■Uniform brightness from head to tail, excellent dimming performance
- ■5 m per reel; 100 mm (DC24V) or 50 mm (DC12V) cutting unit
Product Specification
| Item No. | LT-2835WW60R-W24 |
| Max. power | 12 W/m |
| Voltan masukan | DC24V / DC12V |
| LED quantity | 60 LEDs/m, 2835 SMD |
| PCB width | 8 mm, 3 oz FPC |
| Unit cutting | 100 mm / 50 mm |
| CCT | 2700K / 3000K / 4000K / 5000K / 6000K |
| CRI | >90 (80+ / 95+ optional) |
| IP class | IP20 / IP55 / IP65 / IP67 |
| Package | 5 m / reel, red & black lead wire L=120 mm AWG20 |
Dimension & Cutting Unit
The two drawings below are the original dimension drawings from the Lightstec catalogue. 8 mm PCB, 5000 mm per reel, red/black lead wire L=120 mm AWG20. Cut only at the marked scissor position: every 100 mm at DC24V, or every 50 mm at DC12V.
Product Photometrics
Measured at 12 W/m, 25 °C. Luminaire lumens per metre and efficacy in lm/W by colour temperature, transcribed from the Lightstec catalogue.
| CCT (K) | Item No. | Luminaire lumens / metre (lm/m) | Efficacy (lm/W) |
|---|---|---|---|
| 2700K | LT-2835WW60R-W24 | 1092 | 91 |
| 3000K | LT-2835NWW60R-W24 | 1104 | 92 |
| 4000K | LT-2835NWW60R-W24 | 1140 | 95 |
| 6000K | LT-2835CW60R-W24 | 1164 | 97 |
Dust & Water Resistant
Four protection options are available for the same strip, so one product can cover dry interiors, bathrooms, covered outdoor areas and wet locations. The cross-sections below are taken from the catalogue and show how each option changes the finished profile height.
| Option | Construction | Typical use |
|---|---|---|
| IP20 | Bare FPC, 3M adhesive backing | Dry indoor, inside aluminium profiles |
| IP55 | Thin silicone coating on the LED face | Kitchens, bathrooms, damp interiors |
| IP65 | Silicone tube / hollow extrusion | Covered outdoor, signage, facades |
| IP67 | Full silicone extrusion, sealed ends | Wet locations, short-term immersion |
Pemasangan
Keep each continuous strip run below 10 m and wire all runs in parallel from the driver — never roll a long run in series, otherwise the tail end will be visibly dimmer. Select a constant-voltage driver rated at least 20% above the total connected load (catalogue note: 24 V, 10 W/m, 2 m; led power < driver wattage).
- Clean the mounting surface before applying the 3M adhesive; use an aluminium profile for heat dissipation and a perfectly straight light line.
- Cut only at the marked cutting unit, then solder or use the matching 2PIN-8MM connector — do not cut through an LED or a resistor.
- For dimming and colour control, place the controller between the driver and the strips; PWM controllers must match the DC12V / DC24V input.
- Seal both ends with silicone and end caps for IP65 / IP67 installations.
Accessory
A complete set of solder-free connectors, waterproof joiners and smart sensors is available for this 8 mm strip, so the same product can be configured for manual switches, occupancy sensing or outdoor installation.
Smart sensor
Quick connector & waterproof connector
- 2PIN-8MM — PCB to cable / PCB to PCB / PCB to PCB with cable / L corner / 90 degree
- 2PIN-8MM-IP65 — waterproof connector for IP65 installations
- Smart sensors — touchless IR, touch dimmer, human IR, door & window sensor, DC12–24V
Profiles
Matching aluminium profiles turn the strip into a finished linear fixture: they dissipate heat, protect the LEDs and produce a perfectly straight, glare-controlled light line. Compatible profile codes: LT-613, LT-508, LT-601, LT-8842A, LT-5878M.
Aplikasi
Cove and indirect lighting, under-cabinet and shelf lighting, retail displays, hotel corridors, signage and lettering, stair and contour lighting, and linear fixtures with aluminium profiles.
Related LED Strip Resources
Wattage, CCT, CRI and IP grade can be mixed within the same SMD strip family. Browse the White Color Series LED strip range for matching models, and see the LED aluminium profile buying guide for system planning.
OEM / ODM & Quotation
Lightstec has been manufacturing LED strip lights and LED linear lighting systems since 2008 in Guangdong, China. Wattage, CCT, CRI, PCB width, IP grade, reel length, packaging and private labelling can all be customized. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 007. Values are catalogue reference data; confirm against the production datasheet before ordering.
Additional information
| Item No. | LT-2835WW60R-W24 |
|---|---|
| LED Type | 2835 SMD |
| LEDs per Metre | 60 |
| Kuasa Maks | 12 W/m |
| Input Voltage | DC24V, DC12V |
| Lebar PCB | 8 mm |
| Cutting Unit | 100 mm, 50 mm |
| CCT | 2700K, 3000K, 4000K, 5000K, 6000K |
| CRI | >90 |
| IP Class | IP20, IP55, IP65, IP67 |
Reviews
There are no reviews yet.