5050SMD DMX512 Digital Strip 12mm 14.4W/m

Descripción

The 5050SMD DMX512 Digital Strip 12mm 14.4W/m is a 12 mm LED strip light from the Lightstec Colorful RGB range, built for professional linear lighting projects. It delivers 14.4 W/m at DC24V with CRI >90, and is available in IP20/IP55/IP65/IP67 protection options. Wattage, CCT, CRI, PCB width, IP grade, reel length and private labelling can be customised for OEM/ODM orders.

¿Por qué elegir esta franja?

• ■High-output RGB / RGBW / RGBCCT and digital pixel options
• ■PWM, DMX512 and SPI control compatible
• ■High quality FPC with genuine 3M adhesive backing
• ■Solder-free multi-pin connectors for fast installation
• ■IP20 / IP65 / IP67 versions for indoor and outdoor use

Especificación de producto

Unidad de corte y dimensión

The drawings below are the original dimension drawings from the Lightstec catalogue for this model. 12 mm PCB, 5000 mm per reel, red/black lead wire L=120 mm AWG20. Cut only at the marked scissor position: every 100mm at DC24V, or every see drawing at DC12V.

Fotometría del producto

Measured at 14.4 W/m, 25 °C. Luminaire lumens per metre and efficacy in lm/W by colour temperature, transcribed from the Lightstec catalogue.

Resistente al polvo y al agua

Four protection options are available for the same strip, so one product can cover dry interiors, bathrooms, covered outdoor areas and wet locations. The cross-sections below are taken from the catalogue and show how each option changes the finished profile height.

Instalación

Keep each continuous strip run below 10 m and wire all runs en paralelo from the driver — never roll a long run in series, otherwise the tail end will be visibly dimmer. Select a constant-voltage driver rated at least 20% above the total connected load (catalogue note: 24 V, 10 W/m, 2 m; led power < driver wattage).

• Clean the mounting surface before applying the 3M adhesive; use an aluminium profile for heat dissipation and a perfectly straight light line.
• Cut only at the marked cutting unit, then solder or use the matching 2PIN-8MM connector — do not cut through an LED or a resistor.
• For dimming and colour control, place the controller between the driver and the strips; PWM controllers must match the DC12V / DC24V input.
• Seal both ends with silicone and end caps for IP65 / IP67 installations.

Accessory

A complete set of solder-free connectors, waterproof joiners and smart sensors is available for this 12 mm strip, so the same product can be configured for manual switches, occupancy sensing or outdoor installation. Matching connector code: 2PIN-12MM.

Smart sensor

Quick connector & waterproof connector

• 2PIN-12MM — PCB to cable / PCB to PCB / PCB to PCB with cable / L corner / 90 degree
• 2PIN-12MM-IP65 — waterproof connector for IP65 installations
• Smart sensors — touchless IR, touch dimmer, human IR, door & window sensor, DC12–24V

Profiles

Matching aluminium profiles turn the strip into a finished linear fixture: they dissipate heat, protect the LEDs and produce a perfectly straight, glare-controlled light line. Compatible profile codes: LT-613, LT-508, LT-601, LT-8842A, LT-5878M.

Aplicaciones

Architectural facades, stage and entertainment lighting, signage, bars, RGB/RGBW accent lighting and DMX / SPI controlled dynamic installations.

OEM/ODM y cotización

Lightstec fabrica tiras de luces LED y sistemas de iluminación lineal LED desde 2008 en Guangdong, China. Se pueden personalizar la potencia, CCT, CRI, ancho de PCB, grado IP, longitud del carrete, embalaje y etiquetado privado. Contáctenos para obtener una muestra, una hoja de datos o una cotización de proyecto; le respondemos con una hoja de especificaciones completa y un plazo de entrega.

Specification and drawings: Lightstec LED Strip Light Catalog, page 061. Values are catalogue reference data; confirm against the production datasheet before ordering.

Recursos relacionados con tiras de LED

RGB and RGBW runs rely on the right controller, amplifier and wiring layout. Browse the RGB / RGBW LED strip range para ver los modelos coincidentes y consulte la LED strip connector guide para la planificación del sistema.