3535SMD 120leds RGB Color 8mm 9.6W/m

Descripción

The 3535SMD 120leds RGB Color 8mm 9.6W/m is a 8 mm LED strip light from the Lightstec Colorful RGB range, built for professional linear lighting projects. It delivers 9.6 W/m at DC24V with CRI >90, and is available in IP20/IP55/IP65/IP67 protection options. Wattage, CCT, CRI, PCB width, IP grade, reel length and private labelling can be customised for OEM/ODM orders.

¿Por qué elegir esta franja?

• ■High-output RGB / RGBW / RGBCCT and digital pixel options
• ■PWM, DMX512 and SPI control compatible
• ■High quality FPC with genuine 3M adhesive backing
• ■Solder-free multi-pin connectors for fast installation
• ■IP20 / IP65 / IP67 versions for indoor and outdoor use

Especificación de producto

Unidad de corte y dimensión

The drawings below are the original dimension drawings from the Lightstec catalogue for this model. 8 mm PCB, 5000 mm per reel, red/black lead wire L=120 mm AWG20. Cut only at the marked scissor position: every 50mm at DC24V, or every see drawing at DC12V.

Resistente al polvo y al agua

Four protection options are available for the same strip, so one product can cover dry interiors, bathrooms, covered outdoor areas and wet locations. The cross-sections below are taken from the catalogue and show how each option changes the finished profile height.

Instalación

Keep each continuous strip run below 10 m and wire all runs en paralelo from the driver — never roll a long run in series, otherwise the tail end will be visibly dimmer. Select a constant-voltage driver rated at least 20% above the total connected load (catalogue note: 24 V, 10 W/m, 2 m; led power < driver wattage).

• Clean the mounting surface before applying the 3M adhesive; use an aluminium profile for heat dissipation and a perfectly straight light line.
• Cut only at the marked cutting unit, then solder or use the matching 2PIN-8MM connector — do not cut through an LED or a resistor.
• For dimming and colour control, place the controller between the driver and the strips; PWM controllers must match the DC12V / DC24V input.
• Seal both ends with silicone and end caps for IP65 / IP67 installations.

Accessory

A complete set of solder-free connectors, waterproof joiners and smart sensors is available for this 8 mm strip, so the same product can be configured for manual switches, occupancy sensing or outdoor installation. Matching connector code: 2PIN-8MM.

Smart sensor

Quick connector & waterproof connector

• 2PIN-8MM — PCB to cable / PCB to PCB / PCB to PCB with cable / L corner / 90 degree
• 2PIN-8MM-IP65 — waterproof connector for IP65 installations
• Smart sensors — touchless IR, touch dimmer, human IR, door & window sensor, DC12–24V

Profiles

Matching aluminium profiles turn the strip into a finished linear fixture: they dissipate heat, protect the LEDs and produce a perfectly straight, glare-controlled light line. Compatible profile codes: LT-613, LT-508, LT-601, LT-8842A, LT-5878M.

Aplicaciones

Architectural facades, stage and entertainment lighting, signage, bars, RGB/RGBW accent lighting and DMX / SPI controlled dynamic installations.

OEM/ODM y cotización

Lightstec fabrica tiras de luces LED y sistemas de iluminación lineal LED desde 2008 en Guangdong, China. Se pueden personalizar la potencia, CCT, CRI, ancho de PCB, grado IP, longitud del carrete, embalaje y etiquetado privado. Contáctenos para obtener una muestra, una hoja de datos o una cotización de proyecto; le respondemos con una hoja de especificaciones completa y un plazo de entrega.

Specification and drawings: Lightstec LED Strip Light Catalog, page 063. Values are catalogue reference data; confirm against the production datasheet before ordering.

Recursos relacionados con tiras de LED

RGB and RGBW runs rely on the right controller, amplifier and wiring layout. Browse the RGB / RGBW LED strip range para ver los modelos coincidentes y consulte la LED strip connector guide para la planificación del sistema.