2835SMD 192leds Color Temperature adjustable 5mm 9.6W/m
Tunable white from warm to cool on one strip — 2700K/6000K with CRI >90 and single-bin consistency.
- ■2700K–6000K continuously adjustable white
- ■High quality FPC & genuine 3M adhesive
- ■CRI 80+ / 90+ / 95+ optional
- ■3-Step MacAdam ellipse, single binning
- ■Superior colour consistency & dimming performance
Descripción
The 2835SMD 192leds Color Temperature adjustable 5mm 9.6W/m is a 5 mm LED strip light from the Lightstec Tunable White range, built for professional linear lighting projects. It delivers 9.6 W/m at DC24V with CRI >90, and is available in IP20/IP55/IP65/IP67 protection options. Wattage, CCT, CRI, PCB width, IP grade, reel length and private labelling can be customised for OEM/ODM orders.
¿Por qué elegir esta franja?
- ■2700K–6000K continuously adjustable white
- ■High quality FPC & genuine 3M adhesive
- ■CRI 80+ / 90+ / 95+ optional
- ■3-Step MacAdam ellipse, single binning
- ■Superior colour consistency & dimming performance
Especificación de producto
| Número de artículo. | LT-2835RVW192R-W24 |
| Máx. fuerza | 9,6 W/m2 |
| voltaje de entrada | CC 24 V |
| Cantidad de LED | 192 LEDs/m |
| ancho de placa de circuito impreso | 5 mm |
| Unidad de corte | 62.5 mm |
| CCT | 2700K/6000K |
| IRC | >90 |
| clase IP | IP20/IP55/IP65/IP67 |
| Paquete | 5 m / carrete, cable rojo y negro |
Unidad de corte y dimensión
The drawings below are the original dimension drawings from the Lightstec catalogue for this model. 5 mm PCB, 5000 mm per reel, red/black lead wire L=120 mm AWG20. Cut only at the marked scissor position: every 62.5 mm at DC24V, or every see drawing at DC12V.
Fotometría del producto
Medido a 9,6 W/m, 25 °C. Lúmenes de luminaria por metro y eficacia en lm/W por temperatura de color, transcritos del catálogo de Lightstec.
| CCT (K) | Número de artículo. | Lúmenes de luminaria/metro (lm/m) | Eficacia (lm/W) |
|---|---|---|---|
| 2700K | LT-2835RVW192R-W24 | 417 | 87 |
| 6000K | LT-2835RVW192R-W24 | 456 | 95 |
Resistente al polvo y al agua
Four protection options are available for the same strip, so one product can cover dry interiors, bathrooms, covered outdoor areas and wet locations. The cross-sections below are taken from the catalogue and show how each option changes the finished profile height.
| Option | Construction | Uso típico |
|---|---|---|
| IP20 | Bare FPC, 3M adhesive backing | Dry indoor, inside aluminium profiles |
| IP55 | Thin silicone coating on the LED face | Kitchens, bathrooms, damp interiors |
| IP65 | Silicone tube / hollow extrusion | Covered outdoor, signage, facades |
| IP67 | Full silicone extrusion, sealed ends | Wet locations, short-term immersion |
Instalación
Keep each continuous strip run below 10 m and wire all runs en paralelo from the driver — never roll a long run in series, otherwise the tail end will be visibly dimmer. Select a constant-voltage driver rated at least 20% above the total connected load (catalogue note: 24 V, 10 W/m, 2 m; led power < driver wattage).
- Clean the mounting surface before applying the 3M adhesive; use an aluminium profile for heat dissipation and a perfectly straight light line.
- Cut only at the marked cutting unit, then solder or use the matching 2PIN-8MM connector — do not cut through an LED or a resistor.
- For dimming and colour control, place the controller between the driver and the strips; PWM controllers must match the DC12V / DC24V input.
- Seal both ends with silicone and end caps for IP65 / IP67 installations.
Accessory
A complete set of solder-free connectors, waterproof joiners and smart sensors is available for this 5 mm strip, so the same product can be configured for manual switches, occupancy sensing or outdoor installation. Matching connector code: 2PIN-5MM.
Smart sensor
Quick connector & waterproof connector
- 2PIN-5MM — PCB to cable / PCB to PCB / PCB to PCB with cable / L corner / 90 degree
- 2PIN-5MM-IP65 — waterproof connector for IP65 installations
- Smart sensors — touchless IR, touch dimmer, human IR, door & window sensor, DC12–24V
Profiles
Matching aluminium profiles turn the strip into a finished linear fixture: they dissipate heat, protect the LEDs and produce a perfectly straight, glare-controlled light line. Compatible profile codes: LT-613, LT-508, LT-601, LT-8842A, LT-5878M.
Aplicaciones
Hotels, restaurants, offices and residences where the white tone must follow the time of day: cove lighting, retail displays, meeting rooms and tunable-white linear fixtures.
OEM/ODM y cotización
Lightstec fabrica tiras de luces LED y sistemas de iluminación lineal LED desde 2008 en Guangdong, China. Se pueden personalizar la potencia, CCT, CRI, ancho de PCB, grado IP, longitud del carrete, embalaje y etiquetado privado. Contáctenos para obtener una muestra, una hoja de datos o una cotización de proyecto; le respondemos con una hoja de especificaciones completa y un plazo de entrega.
Specification and drawings: Lightstec LED Strip Light Catalog, page 044. Values are catalogue reference data; confirm against the production datasheet before ordering.
Recursos relacionados con tiras de LED
Tunable white strips need a CCT controller and a correctly sized 24 V driver. Browse the Tunable White (CCT) LED strip range para ver los modelos coincidentes y consulte la LED strip controller guide para la planificación del sistema.
Información adicional
| Número de artículo. | LT-2835RVW192R-W24 |
|---|---|
| Tipo de LED | 2835 SMD |
| LED por metro | 192 |
| Potencia máxima | 9,6 W/m2 |
| Voltaje de entrada | CC 24 V |
| Ancho de PCB | 5 mm |
| Unidad de corte | 62.5 mm |
| CCT | 2700K, 6000K |
| IRC | >90 |
| Clase IP | IP20, IP55, IP65, IP67 |
Valoraciones
No hay valoraciones aún.