LT-HS-SENSOR-IN Hand Sweep Sensor — Inside Profile
Hygienic no-touch control: a quick hand sweep switches the light, holding over 3 seconds starts 0–100% dimming.
- ■Quick hand sweep for on/off — no physical contact
- ■Cover the sensor over 3 seconds to start 0–100% dimming
- ■DC24 V, 5 A max input current, only 15 mA static load
- ■Sensing distance < 5 cm
- ■Slim L × W17.3 × H7 mm board fits inside an aluminium profile
Beschreibung
The LT-HS-SENSOR-IN is an IR hand-sweep sensor board designed to sit inside an aluminium LED profile behind the diffuser. A quick hand movement switches the light on or off; holding a hand over the sensor starts smooth 0–100% dimming. It is a hygienic control choice for kitchens and worktops.
Why choose this sensor
- ■No-touch IR hand sweep — ideal for kitchen and worktop lighting
- ■On/off with one quick sweep
- ■0–100% dimming by covering the sensor for over 3 seconds
- ■DC24 V, 5 A max input current, 15 mA static load
- ■< 5 cm sensing distance avoids accidental triggering
- ■L × W17.3 × H7 mm board for inside-profile installation
Product Specification
| Model No. | LT-HS-SENSOR-IN |
| Input Voltage | DC24 V |
| Input Current (max) | 5 A |
| Static load | 15 mA |
| Sensing Distance | < 5 cm |
| Size | L × W17.3 × H7 mm |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Parameter | Actual value / behaviour |
|---|---|
| Trigger method | IR hand sweep (no physical contact) |
| Sensing distance | < 5 cm |
| On / Off behaviour | Hand sweep once quickly |
| Dimming behaviour | After switch-on, cover the sensor over 3 seconds, then 0–100% dimming starts |
| Electrical | DC24 V, 5 A max input current, 15 mA static load |
| Form factor | L × W17.3 × H7 mm, inside aluminium profile |
Trigger behaviour
- On/Off: hand sweep once quickly.
- Dimmable: after turn on the light, cover the sensor over 3 second, then start dimming (0–100%).
Installation
Place the board inside the aluminium profile behind the diffuser, connect the six-output-port power supply to AC220 V, and run the 1.5 m output cable to the strip — the switch sits in the middle of the run.
Anwendung
Kitchen under-cabinet and worktop lighting where a hand wave is cleaner than a touch switch; the catalogue shows both the wiring sketch and a finished kitchen installation.
Related LED Strip Resources
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range for matching models, and see the LED sensor and switch guide for system planning.
OEM / ODM & Quotation
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 070. Values are catalogue reference data; confirm against the production datasheet before ordering.
Zusätzliche Informationen
| Model No. | LT-HS-SENSOR-IN |
|---|---|
| Sensor Type | Hand sweep (IR) |
| Input Voltage | DC24 V |
| Max Input Current | 5 A |
| Static Load | 15 mA |
| Sensing Distance | < 5 cm |
| Dimmen | 0–100 % |
| Size | L × W17.3 × H7 mm |
| Montage | Inside profile |
| Certification | CE / RoHS / FC / IC |
Rezensionen
Es gibt noch keine Rezensionen.