2835SMD 192leds LED Strip light 15.6mm 18W/m

الوصف

The 2835SMD 192leds LED Strip light 15.6mm 18W/m is a 15.6 mm LED strip light from the Lightstec White Color Series, built for professional linear lighting projects. It delivers 18 W/m at DC24V/DC12V with CRI >90, and is available in IP20/IP55/IP65/IP67 protection options. Wattage, CCT, CRI, PCB width, IP grade, reel length and private labelling can be customised for OEM/ODM orders.

Why choose this strip

• ■0.5–24 W/m customizable wattage
• ■High quality FPC & genuine 3M adhesive
• ■CRI 80+ / 90+ / 95+ / full spectrum optional
• ■3-Step MacAdam القطع الناقص، سلة واحدة
• ■Superior colour consistency & dimming performance

Product Specification

Dimension & Cutting Unit

The drawings below are the original dimension drawings from the Lightstec catalogue for this model. 15.6 mm PCB, 5000 mm per reel, red/black lead wire L=120 mm AWG20. Cut only at the marked scissor position: every 31.25 mm at DC24V, or every see drawing at DC12V.

Product Photometrics

Measured at 18 W/m, 25 °C. Luminaire lumens per metre and efficacy in lm/W by colour temperature, transcribed from the Lightstec catalogue.

Dust & Water Resistant

Four protection options are available for the same strip, so one product can cover dry interiors, bathrooms, covered outdoor areas and wet locations. The cross-sections below are taken from the catalogue and show how each option changes the finished profile height.

تثبيت

Keep each continuous strip run below 10 m and wire all runs in parallel from the driver — never roll a long run in series, otherwise the tail end will be visibly dimmer. Select a constant-voltage driver rated at least 20% above the total connected load (catalogue note: 24 V, 10 W/m, 2 m; led power < driver wattage).

• Clean the mounting surface before applying the 3M adhesive; use an aluminium profile for heat dissipation and a perfectly straight light line.
• Cut only at the marked cutting unit, then solder or use the matching 2PIN-8MM connector — do not cut through an LED or a resistor.
• For dimming and colour control, place the controller between the driver and the strips; PWM controllers must match the DC12V / DC24V input.
• Seal both ends with silicone and end caps for IP65 / IP67 installations.

Accessory

A complete set of solder-free connectors, waterproof joiners and smart sensors is available for this 15.6 mm strip, so the same product can be configured for manual switches, occupancy sensing or outdoor installation. Matching connector code: 2PIN-15MM.

Smart sensor

Quick connector & waterproof connector

• 2PIN-15MM — PCB to cable / PCB to PCB / PCB to PCB with cable / L corner / 90 degree
• 2PIN-15MM-IP65 — waterproof connector for IP65 installations
• Smart sensors — touchless IR, touch dimmer, human IR, door & window sensor, DC12–24V

Profiles

Matching aluminium profiles turn the strip into a finished linear fixture: they dissipate heat, protect the LEDs and produce a perfectly straight, glare-controlled light line. Compatible profile codes: LT-613, LT-508, LT-601, LT-8842A, LT-5878M.

Applications

Cove and indirect lighting, under-cabinet and shelf lighting, retail displays, hotel corridors, signage and lettering, stair and contour lighting, and linear fixtures with aluminium profiles.

OEM / ODM & Quotation

Lightstec has been manufacturing LED strip lights and LED linear lighting systems since 2008 in Guangdong, China. Wattage, CCT, CRI, PCB width, IP grade, reel length, packaging and private labelling can all be customized. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.

Specification and drawings: Lightstec LED Strip Light Catalog, page 025. Values are catalogue reference data; confirm against the production datasheet before ordering.

Related LED Strip Resources

Wattage, CCT, CRI and IP grade can be mixed within the same SMD strip family. Browse the White Color Series LED strip range for matching models, and see the LED aluminium profile buying guide for system planning.