LP-5027M Door Open Close Sensor — One Door
One-door open/close sensor that lights a 5–24 V LED strip automatically — 8 cm sensing, φ10 mm embedded head.
- ■Light on when the door opens, off when it closes
- ■Short < 8 cm sensing distance for reliable door detection
- ■5–24 V input, 36 W maximum load at 12 V
- ■φ10 mm embedded head with XH2.54 LHR DC connector
- ■30 mm in-line controller, only 7 mm thick
Description
The LP-5027M is an embedded door open/close sensor for a single cabinet door. A φ10 mm sensor head detects the door movement within 8 cm and switches the connected LED strip through a compact in-line controller, with no wall switch required.
Why choose this sensor
- ■Single-door configuration with one sensor head
- ■< 8 cm sensing distance prevents false triggering
- ■Wide 5–24 V input, 36 W load at 12 V
- ■φ10 mm drill hole, embedded flush mounting
- ■XH2.54 LHR pluggable DC connector
- ■1 m input / 13 cm output cable with 30 mm × 7 mm controller
Product Specification
| Model No. | LP-5027M |
| Input Voltage | 5–24 V DC |
| Power (max) | 36 W (12 V) |
| Sensing Distance | < 8 cm |
| Sensor Drill hold | φ10 mm |
| DC connector | XH2.54 LHR |
| Door configuration | One door |
Product Photometrics — Sensor Performance
A smart sensor is a control device, not a light source: lumen output, CCT and lm/W efficacy do not apply. The table below gives the actual sensing, load and switching characteristics of this model, taken from the Lightstec catalogue rather than a strip photometric test.
| Parameter | Actual value / behaviour |
|---|---|
| Trigger method | Door open / close detection (one door, one sensor) |
| Sensing distance | < 8 cm |
| Switching behaviour | Light on when the door opens, off when it closes |
| Maximum load | 36 W at 12 V (5–24 V DC input) |
| Connector | XH2.54 LHR DC connector |
| Controller / cable | 30 mm × 7 mm controller, 1 m input, 13 cm output |
Dimension & Wiring
The complete original catalogue drawing for this model: sensor body, controller box, input / output cable lengths, connector orientation and drill-hole dimensions. Unit: mm.
Installation
Fit the sensor into a φ10 mm hole in the cabinet frame, plug it into the XH2.54 LHR connector on the in-line controller, wire AC220 V to the driver and connect the LED strip to OUTPUT.
Related LED Strip Resources
Smart sensors switch or dim 12/24 V LED strips from touch, hand sweep, PIR motion or door movement. Browse the Smart Sensor & Accessories range for matching models, and see the LED sensor and switch guide for system planning.
OEM / ODM & Quotation
Lightstec has been manufacturing LED strip lighting and control accessories since 2008 in Guangdong, China. Sensing distance, trigger behaviour, input voltage, cable length, connector type, housing colour, packaging and private labelling can all be customized for project volumes. Contact us for a sample, a datasheet or a project quotation — we reply with a full specification sheet and lead time.
Specification and drawings: Lightstec LED Strip Light Catalog, page 069. Values are catalogue reference data; confirm against the production datasheet before ordering.
Additional information
| Model No. | LP-5027M |
|---|---|
| Sensor Type | Door open/close |
| Input Voltage | 5–24 V DC |
| Max Load | 36 W (12 V) |
| Sensing Distance | < 8 cm |
| Drill Hole | φ10 mm |
| Connector | XH2.54 LHR |
| Door Configuration | One door |
| Mounting | Embedded |
| Certification | CE / RoHS / FC / IC |
Reviews
There are no reviews yet.